第三章单元测试
  1. In the following descriptions, which one is NOT the function of MEC on CFM56-3 engine? ( )

  2. A:Schedules the LPTCC valve
    B:Schedules fuel flow
    C:Schedules VSV’s and VBV’s positions
    D:Schedules the HPTCC valve

    答案:Schedules the LPTCC valve

  3. What’s the main purpose of the servo fuel heater on CFM56-3 engine? ( )

  4. A:To decrease the scavenge oil temperature
    B:To decrease the supply oil temperature
    C:To increase the servo fuel temperature
    D:To increase the combustion fuel temperature
  5. In the following fuel nozzles on CFM56-3 engine, which one must have a richer primary flow path? ( )

  6. A:fuel nozzle positions 1 and 2
    B:fuel nozzle positions 1 and 20
    C:fuel nozzle positions 4 and 5
    D:fuel nozzle positions 14 and 15
  7. What’s the Fail-Safe setting of T2.5 sensor on CFM56-3 engine? ( )

  8. A:760 mmHg / 15℃
    B:59℉ / 15℃
    C:36℉ / 0℃
    D:14.7PSI / 15℃
  9. The CFM56-3 engine symptoms for a T2.5 cold shift are ( ).

  10. A:Possibly cannot get takeoff power with high N2 and EGT
    B:VSV track closed VBV track open
    C:Possible N1 overshoot/bloom on takeoff
    D:Slow starts and accelerations
  11. T2.0 sensor on CFM56-3 engine supplies fuel pressure_________ to the MEC in proportion to the FIT. ( )

  12. A:P6-Pb
    B:Pc-Pb
    C:P7-Pb
    D:P7-P6
  13. Which of the following signals goes into PMC through the J2 connector? ( )

  14. A:PS12
    B:N1 and T12
    C:Ground support equipment
    D:Electrical power from control alternator
  15. How many throttle positions does B737-300 aircraft have when CFM56-3 engine is at idle speed? ( )

  16. A:Three
    B:Only one
    C:Two
    D:Four
  17. How the PMC of CFM56-3 engine knows the thrust lever angle? ( )

  18. A:a LVDT in cockpit senses the PLA and sends an electrical signal directly to PMC
    B:a RVDT in MEC senses the PLA and sends an electrical signal to PMC
    C:a RVDT in cockpit senses the PLA and sends an electrical signal directly to PMC
    D:N2 control alternator on the AGB sends an electrical power to PMC
  19. What equipment can transfer the electrical signal from PMC into servo fuel signal in MEC of CFM56-3 engine? ( )

  20. A:A torque motor on MEC
    B:A pilot valve in MEC
    C:An EHSV on MEC
    D:Six EHSVs on HMU

温馨提示支付 ¥3.00 元后可查看付费内容,请先翻页预览!
点赞(1) dxwkbang
返回
顶部