1.
The tolerance of 132 ±0.0125 is
A:0.025 B:-0.0125 C:+0.025 D:+0.0125
答案:AI参考:正确选项是【D:+0.0125】。\r\n根据题目中的描述，132±0.0125表示的是允许的最大值为132+0.0125，最小值为132-0.0125，因此选项D为正确答案。'
2.
The inclination of the straight line AB to the H plane is known, and the correct projection is
A:B B:A C:C D:D
答案:AI参考:正确选项为【B:A】。\n\n根据题意，直线的倾斜角已知，需要求出直线的正确投影。根据投影的定义，投影的方向与原方向相同，因此正确投影应该是与原直线AB方向相同的投影，即选项B:A。选项A:B是错误的，因为投影的方向与原方向相反。选项C和D也错误，因为它们与原直线AB的方向不一致。'
3.
Known cylinder truncated main view and top view, correct left view is
A:c B:a C:b D:d
答案:AI参考:正确答案是C:b。从图片中可以看出，主视图和俯视图已经确定了一个圆柱体的形状，再根据题目要求需要画一个被削去一部分的圆柱体，因此只有从左视图能看到被削去部分的情况，所以正确答案是C:b。'
4.
Intersection lines may have ( ) pairs of projections intersecting
A:1 B:2 C:3 D:1 or 2 or 3
答案:AI参考:答案：D\n推理过程：题干中明确说了“可能有多对交线”\n因此选择D。这个选项最能符合原文，同时也覆盖了所有的可能性。而A选项虽然覆盖了“一对一”的可能性，但覆盖不了其他可能性，所以不符合原文；B和C虽然能覆盖部分可能性，但是未将题干中所有可能性涵盖进去。\n总的来说，这个题目没有特别多的纠结点，关键就是抓住“可能有多对交线”这句话。选项D可以囊括所有的可能性，因此为正确答案。'
5.
What is the shape of the object with two views that are both triangles and one view is a circle
A:frustum of a cone B:cone C:frustum of a pyramid D:cylinder
答案:AI参考:正确答案是C：frustum of a pyramid。\n这是一个几何体的一个部分，也就是从三角形视图中看到的是一个圆，也就是三棱锥的截面图。选项中只有C符合要求，是截面形状是圆的圆锥形的一部分，其他选项与描述不符。因此，正确答案是C。'
6.
Tolerances indicate the range within which dimensions are allowed to change and must be ( )
A:zero B:tolerance equal to basic deviation C:positive number D:negative number
答案:AI参考:正确选项是【B:tolerance equal to basic deviation】。\n\n原文中提到tolerances表示允许尺寸变化的范围，并且必须等于基本偏差，因此选项B“tolerance equal to basic deviation”符合原文意思。选项A“zero”表示零误差，不符合原文；选项C“positive number”表示正数，与原文中的“允许尺寸变化的范围”不符；选项D“negative number”表示负数，同样与原文不符。'
7.
Please point out several wrong dimensions in the figure below
A:3 B:1 C:4 D:2
答案:AI参考:通过对题目中给出的图片的观察与分析，可以发现选项D为错误选项，因为该选项与图片中的标注不符。图片中明确指出的是三个错误，这三个错误都是数字对应的不一致。所以答案是D：2。'
8.
To determine which graph D, E, F three points of the three sides of the projection is correct.
A:a B:b C:c D:d
答案:AI参考:正确选项是：D:d。\n\n题目中提到需要确定投影的三个边的三个点在哪个图上，根据图片中的坐标系，正确的选项应该是d，因为d是投影的第三个点的坐标。其他选项可能不正确或与题目要求不符。'
9.
According to the front view, choose the possible axonometric drawings
A:B B:C C:D D:A
答案:AI参考:根据题目中的前视图，我们可以推断出这可能是一个立体的几何体，它有一些部分的正面展示，而在其他的部分中存在缺失的信息。在选项中，我们可以看到四个选项A、B、C、D。由于没有给出具体的信息，我们无法确定哪一个选项是正确的。\n\n但是，根据图片中给出的信息，我们可以尝试根据一些规则进行猜测。由于图片中显示的是一个立体的几何体，所以选项A和B中的字母都可能是立体的，而且选项C和D中的字母看起来都不像是一个立体的几何体。\n\n因此，基于这些信息，我猜测选项D可能是一个正确的答案。\n\n因此，正确选项是：D:A。'
10.The square is used to make horizontal line
A:错误 B:正确
答案:正确
11.Based on the given figures below, the front view is correct
A:错误 B:正确 12.Is the cube tangent to the cylinder, is its view correct?
A:正确 B:错误 13.The top view is right based on the given views and pictorial drawing
A:正确 B:错误 14.The top side view is right based on the given drawings
A:正确 B:错误 15.According to the given figures, the top view is wrong and the dashed line should be changed into thick line
A:对 B:错 16.The intersections in the left side view are right
A:正确 B:错误 17.If the two straight lines in space are parallel to each other, their projections on the same plane must be parallel to each other
A:错误 B:正确 18.According to the given pictorial drawing, the left view is correct.
A:正确 B:错误 19.Determine whether the three-sided projection of the following solid is correct
A:错误 B:正确 20.The two lines in the graph intersect
A:正确 B:错误 21.The intersection line of the three-dimensional plane of the plane is a plane polygon
A:正确 B:错误 22.Determine whether the three-sided projection of the following solid is correct
A:正确 B:错误 23.The top view is right based on the given views and pictorial drawing
A:正确 B:错误 24.Closeness refers to the fact that the shape of the intersecting line of the plane is a closed polygons.
A:正确 B:错误 25.The intersections in the top side view are right
A:正确 B:错误 26.The projection of a vertical line on the vertical projection plane must accumulate into a point.
A:错误 B:正确 27.According to the given figures, the left view is right
A:正确 B:错误 28.The intersecting line is the common cable between the intersecting plane and the three-dimensional surface.
A:正确 B:错误 29.There is a hole in both the top and side of the cube. is the following isometric diagram correct?
A:错误 B:正确 30.A stud has two ends, they are nut end and metal end
A:正确 B:错误 31.Tolerances indicate the range within which dimensions are allowed to change and must be positive number.
A:错误 B:正确 32.According to the given figures, the top view is right
A:正确 B:错误 33.According to the given figures, the top view is right
A:错误 B:正确 34.When dimensioning of metric thread, the extension line should be drawn from major diameter
A:错误 B:正确 35.The top view is right based on the given views and pictorial drawing
A:错 B:对 36.Two cylinders are orthogonal, which means that the axis of the two cylinders is vertical and intersecting.
A:错误 B:正确 37.According to the given figures, the top view is right
A:错误 B:正确 38.According to the given pictorial drawing , the top view is correct
A:错误 B:正确 39.Determine whether the three-sided projection of the following solid is correct?
A:正确 B:错误 40.The projections of the line AB are right
A:正确 B:错误 41.The front view of the triangular pyramid is wrong because the dash line does not exist
A:正确 B:错误 42.According to the given figures ,the left view is right
A:正确 B:错误
温馨提示支付 ￥3.00 元后可查看付费内容,请先翻页预览!
