第九章测试1.According to the constitutive relation of block and joint, the attribute parameters needed for numerical calculation are determined, and the mechanical parameters of the interface between overburden rock and coal-rock stratum are determined according to the physical and mechanical test data in laboratory and field.( )
A:对 B:错
答案:A
2.Because the numerical simulation is carried out in computer software, there is no need to determine the density similarity ratio and stress similarity ratio.( )
A:对 B:错 3.When the number of layers laid by the physical similarity model reaches the surface directly, no additional force is required.( )
A:错 B:对 4.The geometric similarity ratio of numerical simulation is 1:1.( )
A:错 B:对 5.Physical similarity simulation and numerical simulation are the same in the material collection step.( )
A:错 B:对 6.In numerical simulation, the model boundary effect should be considered and saint Venant's principle used. ( )
A:错 B:对 7.Horizontal stress calculation is usually expressed by multiplying the lateral pressure coefficient by ( ) when horizontal constraints are applied to the left and right boundaries of the model.
A:Gravity stress B:The vertical stress C:Principal stress D:The tangential stress 8.What factors are related to the fracture mechanism of overlying rock mass in stope ( ).
A:Rock lithology B:Buried depth C:Coal seam thickness D:Mining method 9.Physical similarity simulation versus numerical simulation what needs to be done in the material gathering step ( ).
A:Obtain the physical and mechanical properties of rock are through experiments B:Analysis of geological conditions, obtain the comprehensive histogram of coal and rock strata C:Get a geological overview, identify the goals and problems of the simulation D:Calculate the location of key layers, determine the number of layers and horizons for simulation 10.Physical similarity simulation determines the principles that similar materials need to follow( ).
A:Materials should be easy to obtain, easy to manufacture, easy to lay. B:When the similar materials are selected, the main physical and mechanical properties of the corresponding parts of the model and prototype should be similar. C:The mechanical properties of the material are stable and not easily affected by environmental changes. D:When the ratio of mixed materials is changed, its mechanical properties can be greatly changed.
温馨提示支付 ¥3.00 元后可查看付费内容,请先翻页预览!