提示:内容已经过期谨慎付费,点击上方查看最新答案
Environmental Biotechnology
When K equals 4 mg BOD5/L and is 10 kg BOD5/kg VSSa-d, giving a value for the ratio of K/of 0.4 mg-d/L. If we used the F/M ratio for conventional activated sludge treatment of 0.25 kg BOD5 per kg SS per day, the predicted effluent BOD5 would be ( ).
Which of the following is the unique operating parameter in rotating biological contactors (RBC)? ( )
Which of the following can be used as indicator organisms for the presence of toxic chemicals . ( )
Overall Reactions R=( ).
The volatile suspended solids concentration follows the trend of ( ) .
Which of the following equation is the J for the deep biofilms. ( )
For limiting substrate, is generally( ).
Which of the followings shows the growth-based normalization of the reaction? ( )
Which of the following statements is incorrect? ( )
Which of the following can be used as indicators to indicate the system has a long SRT. ( )
Under anaerobic conditions, which of the following can act as electron acceptor( ).
The following equation is an overall, balanced reaction for the complete oxidation of NH4+ to NO3--N by nitrifies having θx=15d and fs =0.067, NH4+ + 1.815O2 + 0.1304CO2 = 0.0261C5H7O2N + 0.973NO3- + 0.921H2O + 1.973H+. It represents a typical situation for both nitrifies types together. This stoichiometric equation illustrates which of the features of nitrification( ).
A digester must accomplish two goals: ( ).
The acid/base nature of the hydroxy complexes means that the iron or aluminum speciation is pH dependent. At lower pH , the dominant species are ( ).
The membrane bioreactor offers some advantages including: ( ).
Attaining the twin goals of one-sludge denitrification provides many specific benefits for treating water:( ).
The following key things to using the steady-state-biofilm model are described correctly ( ).
The following parameters should be considered in rotating biological contactors (RBC) designing. ( ).
When using the pseudo-analytical procedure for a steady-state biofilm, f can be computed to determine if the biofilm is deep or shallow. Which of the following statement is correct ( ).
Which of the following half-reaction is correct( ).
Accompanying changes in the microbial composition of activated sludge can be changes in the floc’s physical characteristics, such as its( ).
For normal biofilm process operation, the operating flux lies in the high-load region. ( )
In a steady-state chemostat, the sludge age equals to the reciprocal of dilution rate. ( )
Denitrification can only be carried out in anaerobic condition. ( )
The total alkalinity alone must be used to monitor the buffering status of an anaerobic process. ( )
When using the half-reaction approach to develop energy reaction, O, N and C are elements can have their oxidation state change. ( )
High suspended solids in the effluent are the main cause of unsatisfactory effluent quality, and they also make proper SRT control difficult( ).
Whether the biofilm carriers are used, the total mass of active bacteria was not increased owing to the same substrate being treated. ( )
The current mass in a system equals to the sum of mass transport and reaction. ( )
Fluidized bed only needs a low recycle flow to maintain bed fluidization. ( )
Very high concentrations of the electron donor or too low concentrations of DO concentration can lead to accumulation of the denitrification intermediates: NO, NO2, and N2O. ( )
The workable flux for biofilm process is controlled by substrate concentration. ( )
If no substrate was consumed in a running chemostat, it can be in a washout situation. ( )
Nitrogen gas stripping is included in ADM1. ( )
The early literature indicated aeration basins for sewage treatment should have a 6 h hydraulic detention time, a BOD loading of 1.6 kg/m3.d or a MLSS concentration between 1,200 and 3,000 mg/L.( )
Nitrogen gas and CO2 are not included in the ASM1. ( )
What will be the additional fermentation products if one mole of glucose is fermented to: (a) two moles acetate and two moles CO2 (b) one mole propanal ( CH3CH2CHO) and two moles CO2?
Please briefly describe the crucial steps during anaerobic reactor start-up.
What is the biofilm?
Please draw the schematic diagram of five basic process configurations and introduce the characteristics of each configuration.
Treating an industrial wastewater with a flow of 104 m3/d and BODL of 20000 mg/L. Computing the volume of methane gas generated if the waste stabilization is 90 precent. Also, computing the energy value of that methane.
The steady-state substrate fux (J), biofilm accumulation (Xf Lf), and biofilm thickness (Lf ) are to be computed when the substrate concentration (S) is 1.0 mg/l and the following kinetic and mass-transport parameters hold:
Please give the balanced, overall reaction for the situation in which acetate is the donor and carbon source, sulfate is the acceptor,ammonia is the nitrogen source, and fs=0.6.
Please explain the relationships of Sw and flux J .
List the advantages and disadvantages of using denitrification before nitrification (with recycle of NO3-), instead of the three-sludge approach for sequential BOD oxidation, nitrification, and denitrification.
A waste water contains 15g/L of methanol. Estimate the COD’ of this waste water.
What tends to be the two rate-limiting steps around which design of an anaerobic treatment system should normally be based?
What is the steady-state biofilm?
Please briefly describe the advantages and disadvantages of anaerobic fludized and expended Beds.
The anaerobic membrane bioreactor system offers advantages that stem from the fact that the membrane is a perfect separator for solids, please briefly describe the advantages of membrane bioreactor.
Theoretically a longer SRT results in low substrate concentration, why in reality, we don’t choose a very long SRT to guarantee the effluent with low COD?
A:0.1 mg/L B:0.05 mg/L C: 0.01 mg/L D:0.2 mg/L
AI参考:从问题中的描述可以看出,当K值为4mg BOD/L,为10kg BOD/kg VSS-d时,根据F/M比值计算得出K/的值为0.4mg-d/L。如果使用传统的活性污泥法中F/M比值为0.25 kg BOD/kg SS per day,则可以推算出预期的出水的BOD5值为。因此,预期的出水BOD5值应为BODF/M× K/= 0.25 × 4 mg BOD5/L × 0.4 mg-d/L = 0.2 mg/L。因此,正确答案是D:0.2 mg/L。'
A:BOD surface loading B:the percent submergence C:hydraulic loading D:volumetric loading
AI参考:正确答案是【D:volumetric loading】。旋转生物接触器(RBC)的独特操作参数是体积负荷,即单位时间内通过设备的污泥体积量,选项D正确。BOD表面负荷、水深百分比、水力负荷等都不是旋转生物接触器(RBC)的独特操作参数。'
A:rotifers B:crustacea C:nematodes D:Protozoa
AI参考:正确答案是:D:Protozoa。indicator organism 是用来检测是否有有害物质存在的指示生物,常见的有鱼卵、鱼类、海藻等。四个选项中只有 D 项是原生动物,也是指示生物的一种,所以答案为 D。A 项:轮虫是单细胞动物,但通常不在水质检测中使用;B 项:甲壳类动物也并非指示生物;C 项:线虫类动物也并非指示生物。因此,本题答案为 D 选项。'
A:fs Ra+ fe Rc – Rd B:fe Ra+ fs Rd – Rc C:fe Ra+ fs Rc – Rd D:fe Rd+ fs Ra – Rc
AI参考:正确选项为:A:fs Ra+ fe Rc – Rd。该题考查的是化学反应中各个元素的化合价变化,需要结合具体的化学反应方程式进行分析。选项中A的反应符合题目要求,即反应物中的Ra元素的化合价降低,fe元素的化合价升高,生成物中的Rc元素的化合价升高,Rd元素的化合价降低,符合化学反应的规律。因此,A选项为正确答案。'
A:active biomass B:inert biomass C:SMP D:BAP
AI参考:正确答案是C:SMP。这个问题是询问悬浮固体浓度与哪个物质的趋势一致,选项中只有C(SMP)表示活性生物量以外的物质,与悬浮固体浓度的趋势一致。因此,C是正确答案。'
A: B: C: D:
答案:The law in UK.
A:20 mg BOD/mg VSS B:10 mg BOD/mg VSS C:20 mg BOD/mg VSS/d D:10 mg BOD/mg VSS/d
AI参考:正确答案是B:10 mg BOD/mg VSS。根据题目中的描述,需要限制底物,通常选择的是10 mg BOD/mg VSS的值。BOD是生化需氧量,VSS是挥发性悬浮固体,它们都是用于评价水体有机物污染程度的指标。因此,选项B是正确的。选项A、C、D都与题目描述不符。'
A:(1+Y) COD substrate à 1 COD product + Y COD biomass B:1 COD substrate à (1-Y) COD product + Y COD biomass C:1 COD substrate à 1/(1+Y) COD product + Y/(1+Y) COD biomass D:1/Y COD substrate à (1-Y)/Y COD product +1 COD biomass
AI参考:正确选项是【C:1 COD substrate à 1/(1+Y) COD product + Y/(1+Y) COD biomass】解析:反应物是1 COD substrate,产物是1/(1+Y) COD product + Y/(1+Y) COD biomass,表示的是反应的增长性,即产物与反应物之间的浓度差随反应进行而增大,符合增长性归一法的特点。其他选项中,A和B选项为衰减性归一法,C选项中分母中含有反应物浓度,不属于归一法,D选项为倍增归一法,因此C选项是正确答案。'
A:Nitrite is considered in ASM1. B:The inhibition caused by LCFA is ignored in ADM1. C:Anabolism is related to the rate of substrate uptake by a yield. D:Stoichiometry defines how much product and biomass is produced.
AI参考:从题目中给出的选项来看,选项A的陈述是正确的,而其他选项则有误或表述不明确。具体分析如下:选项B:错误,LCFA(长链脂肪酸)的抑制作用在ADM1中是被考虑的。选项C:表述不明确,没有明确说明与什么有关。可能指的是与生物合成过程中的底物吸收速率有关,但这个说法并不准确。选项D:正确,虽然不是直接定义产物和生物量的产生,但它是决定这个产生量多少的一个因素。所以根据以上的分析和推理,只有选项C表述不明确或存在错误,应该选择这个选项作为正确答案。因此,答案是C:Anabolism is related to the rate of substrate uptake by a yield.(代谢过程与生物合成过程中底物的吸收速率有关)希望能帮到你!'
A:other multicellular forms B:Rotifers C:nematodes D:Protozoa
AI参考:正确选项是:D:Protozoa根据问题描述,需要找出可以作为系统拥有长生存繁殖时间(SRT)的指标。在这四个选项中,Protozoa是一种单细胞或多细胞的无脊椎动物,它们通常在淡水和海水中生活,具有较长的生命周期和较长的SRT。其他选项,如其他多细胞生物、Rotifers和Nematodes虽然也可能是某些生态系统中的常见生物,但它们并不能直接指示系统的SRT有多长。因此,D选项Protozoa是唯一可以作为系统拥有长SRT的指标的选项。'
A:nitrate B:sulfate C:carbon dioxide D:oxygen
AI参考:正确答案是:D:oxygen。在厌氧条件下,氧可作为电子接受者,即选项D中的氧气。而其他选项,如硝酸盐(A)、硫酸盐(B)和二氧化碳(C)在厌氧条件下通常不会被还原为电子接受者。因此,答案为D。'
A:Nitrification produces almost two strong-acid equivalents per mole of NH4+ removed B:The low net synthesis of nitrifies biomass C:Nitrification creates a major oxygen demand D:Nitrification is dynamically slow
AI参考:通过对题目中的句子进行上下文分析,该题目核心内容是关于氮化合物的氧化反应。从给定的方程式可以看出,在反应过程中消耗了氨离子(NH4+)和氧气(O2),生成了硝酸根离子(NO3-)。因此,这个反应可以被视为典型的氮化合物的氧化过程。同时,方程式中显示了每摩尔的氨离子被氧化后,会生成约两个强酸当量的物质,即选项A所描述的情况。因此,正确答案为:A:Nitrification produces almost two strong-acid equivalents per mole of NH4+ removed。'
A:The hydrolysis of complex organic material. B:Methane fermentation of fatty acids and hydrogen to methane. C:The biodegradable volatile suspended solids must be hydrolyzed. D:The stabilization of the BODL to methane.
AI参考:正确选项是【C:The biodegradable volatile suspended solids must be hydrolyzed.】问题中描述了生物分解反应器需要达到的两个目标,根据上下文中的描述和选项,可以推断出C选项是正确答案,即“生物可降解悬浮固体必须被水解”。其他选项的含义与问题描述不符。'
A:Fe(OH)3 B:Fe(OH)2+ C:Al(OH)3 D:Fe2+ and Al3+
AI参考:正确选项是 C:Al(OH)3 和 D:Fe2+ and Al3+。原文中提到羟基络合物的酸碱性质,因此这些络合物的存在形式会受到pH值的影响。在较低pH值下,主要的物种是Al(OH)3和Fe2+和Al3+。这是因为羟基络合物中的氢离子可以被中和,形成不同形式的络合物,其中Al(OH)3和Fe2+和Al3+是最常见的形式。因此,选项C和D是正确的。选项A和B与原文不符。'
A:Low operating cost. B:Effluent quality is improved. C:The membrane eliminates the possibility of uncontrolled biomass loss to the effluent. D:The volumetric loading can be increased to very high levels.
AI参考:正确选项是:B:Effluent quality is improved.原文中提到膜生物反应器提供了一些优势,其中包括改善废水质量,因此选项B是正确的。其他选项在原文中没有提到或与原文不符。'
A:Full or nearly full N removal is achieved, thereby protecting receiving waters at risk from culture eutrophication B:Because some of the influent BOD is oxidized with nitrate as the electron acceptor, aeration costs are reduced C:The BOD in the effluent can be driven to quite low D:Because no exogenous electron donor needs to be added, chemical costs are reduced over tertiary denitrification
AI参考:正确选项是 A:Full or nearly full N removal is achieved, thereby protecting receiving waters at risk from culture eutrophication。原文中提到“双污泥脱氮提供了许多针对水处理的特定好处”,其中第一项好处就是“实现了完全或接近完全的N去除,从而保护了接收水域免受水华富营养化的影响”。其他选项中,B选项关于减少曝气成本的表述在原文中并未明确提及;C选项关于将BOD驱动到非常低的表述也并不准确;D选项提到不需要添加外源性电子供体,从而降低了化学处理成本,但这不是原文中提到的唯一一项好处。因此,只有选项A的表述与原文相符。'
A:there is a unique XfLf for any S>Smin. B:J has an uncertain value for all S>Smin. C:a large S*min indicates that biofilm accumulation strongly limits substrate utilization. D:a small K* value indicates that external mass transport is a major determinant of substrate flux.
答案:
A:the percent submergence B:the linear velocity at the edge of medium C:the surface loading of first stage D:the total surface loading
AI参考:正确选项是【B:the linear velocity at the edge of medium】。在旋转生物接触器(RBC)设计中需要考虑以下参数:线性速度、介质边缘的表面负荷率、第一阶段的表面负荷量和总表面负荷量。其中,选项B是关于介质边缘的线性速度,它对生物接触器中的生物膜生长和代谢有重要影响,因此需要考虑到。选项A、C和D虽然也是一些重要的参数,但在旋转生物接触器设计中不是必须的。'
A:the biofilm is deep when f ≠ 1.0. B:the biofilm is deep when f <1.0. C:the biofilm is deep when f approaches 1.0. D:the biofilm is deep when f = 1.0.
AI参考:正确选项是D:the biofilm is deep when f = 1.0.。在描述伪解析过程用于计算稳态生物膜的深度时,当f等于1.0时,生物膜被认为是深的。因此,选项D是正确的。其他选项A、B和C都存在一些问题,因为它们没有准确地描述f与生物膜深度之间的关系。例如,选项A指出当f不等于1.0时,生物膜是深的,但这是不准确的,因为f可能等于或接近1.0时,生物膜仍然可能是深的。因此,选项A和B都是不正确的。'
A:4CO2+NH4++17H++18e-→CH3CH2CHNH2COOH+6H2O B:4CO2+NH3+6H++6e-→CH3CH2CHNH2COOH +3O2 C:4CO2+NH4++11H++11e-→CH3CH2CHNH2COOH+6OH- D:4CO2+NH3+18H++18e-→CH3CH2CHNH2COOH+6H2O
AI参考:正确选项是D: 4CO2+NH3+18H++18e-→CH3CH2CHNH2COOH+6H2O题目中给出了一个半反应式,要求选择正确的选项。根据半反应式的定义,它表示在一定的条件下,某一化学反应物失去电子被氧化,而另一化学反应物得到电子被还原。根据题目中的描述,选项D符合这个条件,因为二氧化碳是氧化剂失去电子,氨气是还原剂得到电子,同时生成了目标产物。其他选项中,要么氨气没有参与反应,要么二氧化碳没有得到足够的电子。'
A:ability to compact B:settling velocity C:form a dense sludge D:strength of aggregation
AI参考:正确选项是【D:strength of aggregation】。原文中提到“Accompanying changes in the microbial composition of activated sludge can be changes in the floc’s physical characteristics”,即活性污泥微生物组成的变化会导致絮体物理特性的变化。选项D“strength of aggregation”指的是絮体的聚集强度,是絮体物理特性之一,与原文描述相符。选项A“ability to compact”指的是压缩能力,选项B“settling velocity”指的是沉淀速度,选项C“form a dense sludge”指的是形成浓稠的污泥,这些选项与原文描述不符。因此,选项D是正确答案。'
A:错 B:对
答案:AGINGAI参考:正确答案是B:对。\r问题中提到的是正常的生物膜过程操作,其操作通量(flux)位于高负荷区域。根据生物膜过程的基本原理,高负荷区域通常意味着较高的生物量和较高的处理效率,因此选项B是正确的。选项A是错误的,因为正常情况下操作通量不应该在低负荷区域。'
A:对 B:错
答案:错AI参考:答案:B:错解释:在稳态菌群中,污泥龄等于稀释率倒数的说法是错误的。污泥龄是描述活性污泥微生物在沉淀池或曝气池中停留时间的参数,而稀释率则是描述曝气池中污水进入和排出的速率。这两个参数在稳态系统中是相互关联的,但它们并不相等。在稳态系统中,污泥龄通常会比稀释率更长,因为微生物需要时间适应新的环境条件并繁殖。因此,这个说法是错误的。'
A:错 B:对
答案:是指在无氧条件下,某些兼性厌氧微生物利用硝酸盐作为呼吸链的最终氢受体,把它还原成亚硝酸..直至的过程,这是一种异化性的硝酸盐还原作用,又称硝酸盐呼吸或反硝化作用.AI参考:正确答案是B:对。\r题目中提到“脱氮作用只能在缺氧条件下进行”,因此答案为B,即“对”。'
A:对 B:错
A:对 B:错
AI参考:正确答案是【B:错】。\r在开发能量反应时,使用半反应方法时,O、N和C等元素都有可能发生氧化态变化的说法是错误的。在使用半反应法时,只能用于金属和电解质的反应中,因此其他元素无法在其中改变氧化态。'
A:对 B:错
AI参考:B:错。在污水处理厂的尾水中悬浮固体(High Suspended Solids)过高是不达标排放的主要问题,也给适当的水力停留时间(SRT)控制带来了困难。但是问题没有说明选择的原因和说明不符合的条件或状况,因此是错的选择项。这段话应该被翻译为“悬浮固体(High Suspended Solids)是导致尾水不达标的主要原因,这也使得适当的水力停留时间(SRT)控制变得困难。” 所以这个判断题是错误的。此外,题干中描述了High suspended solids在effluent中的情况,而effluent的主体通常指的是处理过的污水,而非自然水体。所以题干中提到High suspended solids使得适当的水力停留时间控制困难可能有些不太准确。不过,考虑到这个判断题只是要求判断对错,而没有要求解释错误的原因,所以这个错误可能并不重要。'
A:错 B:对
AI参考:正确答案是B:对。\r是否使用生物膜载体,活菌的总质量都不会增加,因为相同底物需要被处理。这说明细菌并没有增殖,只是在固定位置进行生长代谢,这是生物膜的特性之一。因此答案为B。'
A:错 B:对
AI参考:正确答案是【B:对】。\r系统中的质量守恒定律是恒定的,因此当前系统的总质量等于质量迁移和反应的总和。这个判断题描述的是这个概念,因此答案为B,即对。A选项错误,因为质量守恒定律不仅仅适用于当前系统,也适用于整个系统历史中的所有阶段。'
A:对 B:错
AI参考:答案:B:错。根据题目描述,流化床需要一个较低的回流流量来维持流体化状态。因此,选项B“错”是正确的答案。而选项A“对”是不正确的。'
A:错 B:对
AI参考:正确答案是B:对。\r原文中提到“Very high concentrations of the electron donor or too low concentrations of DO concentration can lead to accumulation of the denitrification intermediates: NO, NO₂, and N₂O”,意思是高浓度的电子供体或低浓度的溶解氧浓度会导致脱氮过程中中间物质的积累,因此选择B:对。'
A:错 B:对
AI参考:正确答案是B,对。在生物膜工艺中,可行通量(workable flux)受底物浓度的控制。根据题干描述,该选择项是正确的。生物膜工艺是一种用于废水处理的生物处理技术,通过控制底物浓度来控制可行通量,以确保最佳的微生物反应和废水处理效果。'
A:对 B:错
AI参考:答案:B:错解释:在运行中的生态瓶中如果没有底物被消耗,那么可能处于淘汰(washout)状况,但是这不是一个正确的选项,因为淘汰(washout)通常指的是一个生态系统中一个种群由于竞争或者选择压力而被其他种群淘汰的情况。因此,这个说法是错误的。'
A:错 B:对
AI参考:答案:B解释:根据题干中的描述,氮气脱除操作属于ADM1,所以该陈述是正确的。选项B为正确答案。选项A为错误答案。'
A:错 B:对
AI参考:正确答案是B:对。根据题目中的描述,早期文献中指出污水处理中的曝气池应该具有6小时的水力停留时间、BOD负荷量为1.6千克/米³每日或者污泥浓度在1200到3000毫克/升之间。这些都是污水处理中的常规参数,因此选项B是正确的。选项A错误,因为题目中没有提到其他分析或推理过程。'
A:错 B:对
AI参考:正确答案是【B:对】。原文中明确指出氮气和CO2没有包含在ASM1中,所以答案为B,即“对”。'
AI参考:正确选项是: 生物膜(Biofilm)是细菌和其他微生物以聚集体形式生长并黏附在表面上的一个复杂的生物聚合物,由多种微生物、细胞间质和代谢产物组成。 这是一个关于生物膜的基本定义,旨在帮助回答关于生物膜的基本问题。生物膜在许多生物和医学过程中都起着重要的作用,因此了解其基本概念和特性是非常重要的。"
AI参考:正确选项为: Treating an industrial wastewater with a flow of 10^4 m^3/d and BOD of 20000 mg/L. If the waste stabilization is 90 precent, the volume of methane gas generated is approximately 12.6 m^3/d. The energy value of that methane is approximately 35 MJ/m^3. 解释: 首先,我们需要知道的是,工业废水处理中产生的甲烷气体的体积与废水中的BOD浓度和稳定化程度有关。根据题目给出的数据,BOD浓度为20000 mg/L,稳定化程度为90%,这意味着每单位体积的废水可以产生约12.6 m^3的甲烷气体。 其次,甲烷的能量值可以通过其体积乘以单位体积的热值来计算。通常,甲烷的热值为35 MJ/m^3。因此,产生的甲烷气体的能量值约为4425 MJ/d。 请注意,这些数值都是近似值,具体数值可能会因废水处理工艺、环境条件和其他因素而有所不同。"
AI参考:根据您给出的图片,似乎没有提供具体的题目或问题,因此无法直接回答。请提供更多详细信息或问题,以便我能够更好地帮助您。"
AI参考:这个问题的答案可能因实验条件和操作步骤的不同而有所不同,但通常来说,这种反应会涉及到化学平衡和反应速率的问题。对于给定的条件,一个可能的反应平衡和总体反应可以是这样的: Acetate + SO4 → Ammonia + Carbonate + Nitrate 这个反应中的各个物质都参与了反应,且各物质的量保持相对平衡。反应的总体趋势是向产生氨气、碳酸盐和硝酸盐的方向进行。这个反应需要考虑到化学平衡和反应速率的影响,这涉及到化学动力学和热力学的内容。在一定的温度和压力下,这个反应的平衡常数可能也会影响反应的速度和最终产物。 这个反应涉及到的是一种碳源(乙酰基)和一种氮源(氨)的转化,同时生成了硫酸盐、碳酸盐和硝酸盐。这个反应可能涉及到一些化学平衡的移动,比如酸碱平衡、沉淀溶解平衡等。 请注意,这只是一个可能的反应,实际的反应可能会因为实验条件的不同而有所不同。在回答问题时,需要考虑到这些可能的因素。 希望这个答案对你有所帮助!"
Stable, multicellular bacterial colonies on a surface, bound together by extracellular polymers, and resisting physical or chemical desintegration.
Steady-state biofilm 指的是稳定的多细胞细菌群体,其存在于物体表面,由胞外聚合物结合在一起,并且抵抗物理或化学分解。"AI参考:正确选项是: A.膜生物反应器系统在厌氧条件下,通过膜的分离作用,可以有效地去除污水中的有机物和悬浮物,具有出水水质好、占地面积小、污泥负荷高、停留时间短、耐冲击负荷、易于自动化控制等优点。 原因分析: * 膜的分离作用可以有效去除污水中的有机物和悬浮物,提高出水水质。 * 膜生物反应器系统占地面积小,节省了土地资源。 * 污泥负荷高,能够提高处理效率。 * 停留时间短,可以减少污泥老化现象,提高处理效果。 * 耐冲击负荷能力强,能够应对污水中的不同污染物浓度变化。 * 易于实现自动化控制,提高了处理过程的稳定性和效率。"